ATS-V Forums banner

Blown Fuses

3370 Views 1 Reply 2 Participants Last post by  vidiman
Hi all from sunny Florida, I'm new to the forum so thought I'd post this as I'm sure I won't be the last person to have this issue.

Just blown a fuse changing a puddle light bulb on my 2016 ATS-V. Beware that this also means the gearbox gets stuck in P!!! After trawling through the Owners Manual, I discovered there is nothing that tells you which fuse box and fuse location is relevant. Anyway, after trawling the web and trying without success to get any info from my local dealer, I started checking each fuse starting with the drivers side fuse box. Thankfully I found the culprit pretty fast, it's the 10amp fuse in position 15 that needs replacing and it fixes the issue.

Can't believe the interior/courtesy lighting is on the same fuse as the auto gearbox shifter, but there you go!

Anyway, love my ATS-V, taking it on the track for the first time on April 23rd, so pretty excited about that.

Happy driving!
1 - 1 of 2 Posts
Hi all from sunny Florida, I'm new to the forum so thought I'd post this as I'm sure I won't be the last person to have this issue.

Just blown a fuse changing a puddle light bulb on my 2016 ATS-V. Beware that this also means the gearbox gets stuck in P!!! After trawling through the Owners Manual, I discovered there is nothing that tells you which fuse box and fuse location is relevant. Anyway, after trawling the web and trying without success to get any info from my local dealer, I started checking each fuse starting with the drivers side fuse box. Thankfully I found the culprit pretty fast, it's the 10amp fuse in position 15 that needs replacing and it fixes the issue.

Can't believe the interior/courtesy lighting is on the same fuse as the auto gearbox shifter, but there you go!

Anyway, love my ATS-V, taking it on the track for the first time on April 23rd, so pretty excited about that.

Happy driving!
SimplyRedders, I am in Fort Lauderdale and also have the 2016 ATS-V, Crystal Frost Edition. Love the car, but ran into an issues with both Recaro lumbar adjustment for the seats; driver and passenger controls stopped moving the seat. The control works and shows up on the CUE screen but nothing is moving in the seat. It surely sounds like a fuse, but cannot find the right one.

The only listing in the manual is for "driver power seat" and "passenger power seat" and the basic power seat part works fine (thankfully). Just thought with your expert fuse experience you may have a suggestion for the fix, or even which box - engine panel, instrument panel left side, rear right panel?

Thank you.
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top